Skip to main content

Introduction

  • Some driver precautions

Driver Installation​

  • Please note that EN needs to be aligned with the top-left corner for installation
  • The EN pin of the FLY mainboard driver port is all on the top-left
  • DP5, PRO X10, and MMU of FLY can only use TP drivers

Driver Configuration​

  • TP drivers are just regular 2209 or 5160, and the configuration method is the same
  • FLY-2240 drivers support UART connection, but manual resistor modification is required
  • Pay attention to the driver sampling resistors, as incorrect configuration may lead to motor and driver damage